Pump :
Flow range: 1 ~15 (m3/h)
Maximum fluid temperature: 35°C
Maximum sand content: 0.25%
Motor:
Power: Single phase: 0.37~2.2kW 220-240V
Three phase: 0.75~7.5kW 380-415V
Insulation class: B
Protection grade: Ip68
Frequency: 50Hz
ST —25 04
Impeller number
Flow(gallon)
Pump name
COMPONENTS | MATERIAL |
Motor external casing | AISI304/201 |
Oil bag clamp | AISI304/201 |
Bottom bearing chock | Cast-iron HT200 |
Top bearing chock | Cast-iron HT200 |
Rotator | AISI304 |
Connector | AISI304 |
Outlet | AISI304 |
Pump external casing | AISI304 |
Splinted hub | AISI304 |
Strainer mesh | AISI304 |
Diffuser | AISI304 |
Impeller | PPO |
Cover plate | PC |
Shaft | AISI304/410 |
Shaft coupling | AISI304 |
TECHNICAL DATA | ||||||||||||||||||||||
PUMP TYPE | STAGES | MOTOR | Q=DELIVERY | |||||||||||||||||||
L/min 0 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 120 | 140 | 160 | 180 | 200 | 220 | PUMP | |||||
KW | HP | m3/h 0 | 1.8 | 2.1 | 2.4 | 2.7 | 3.0 | 3.6 | 4.2 | 4.8 | 5.4 | 6.0 | 7.2 | 8.4 | 9.6 | 10.8 | 12 | 13 | LENGTH | WEIGHT | ||
HEAD (Meter) | MM | KG | ||||||||||||||||||||
ST-2504 | 4 | 0.37 | 0.5 | 26 | 23 | 22 | 22 | 21 | 19 | 17 | 14 | 11 | 7 | 247 | 2.4 | |||||||
ST-2506 | 6 | 0.55 | 0.75 | 38 | 36 | 35 | 33 | 32 | 30 | 26 | 22 | 18 | 12 | 296 | 2.9 | |||||||
ST-2508 | 8 | 0.75 | 1 | 51 | 47 | 46 | 44 | 43 | 39 | 35 | 30 | 24 | 18 | 345 | 3.3 | |||||||
ST-2512 | 12 | 1.1 | 1.5 | 77 | 72 | 71 | 69 | 68 | 63 | 57 | 49 | 41 | 31 | 433 | 4.1 | |||||||
ST-2516 | 16 | 1.5 | 2 | 102 | 98 | 96 | 94 | 92 | 86 | 77 | 68 | 57 | 46 | 542 | 5 | |||||||
ST-2524 | 24 | 2.2 | 3 | 151 | 142 | 139 | 136 | 132 | 122 | 111 | 97 | 80 | 62 | 777 | 6.6 | |||||||
ST-2532 | 32 | 3 | 4 | 203 | 188 | 185 | 180 | 175 | 162 | 146 | 127 | 105 | 80 | 965 | 8.7 | |||||||
ST-2540 | 40 | 3.7 | 5 | 253 | 232 | 227 | 222 | 216 | 202 | 182 | 159 | 131 | 102 | 1160 | 10.4 | |||||||
ST-2544 | 44 | 4 | 5.5 | 278 | 265 | 260 | 254 | 247 | 230 | 210 | 187 | 159 | 127 | 1296 | 11.2 |